Techniques to address fractured instruments in the middle or apical third of the root canal in human permanent teeth: a systematic review of the in vitro studies.

OBJECTIVE: The objective of this study is to investigate techniques for approaching fractured instruments in the root canal and to present possible outcomes in relation to dentin thickness, fracture resistance, technique success, and clinical time. MATERIALS AND METHODS: The bibliographic research was carried out in PubMed, Cochrane, Lilacs, Web of Science, Scopus, grey literature, and manual search. Following the inclusion and exclusion criteria, the titles and abstracts of 506 articles were read. Of these, 60 articles were selected and read in full. Fourteen articles were included in this systematic review. RESULTS: The most studied technique was the ultrasonic technique and obtained good general results. The more apically the instrument is located, the more difficult it is to remove, the more dentin is removed, and the lower the fracture resistance of the tooth. When removal is not possible, the bypass technique can be performed (bypassing), and on weakened teeth or with little dental remnants, the GentleWave System technique can be used. CONCLUSION: This systematic review shows the evidence from laboratory studies that the curvature and the root third in which the fracture of instruments occurred is relevant to fracture resistance and success. The ultrasonic technique got the best results. Well-conducted clinical studies should be performed for clinical practice. CLINICAL RELEVANCE: The approach of fractured instruments in the root canal is efficient with the use of ultrasound, bypass technique, and Gentle Wave System.

Does veneering technique affect the bond strength of bilayer Y-TZP? A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Reasons for failures of bilayer yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) restorations include the core-veneer interface bond strength. The influence of the veneering method on the bond strength of veneered Y-TZP is unclear. PURPOSE: The purpose of this systematic review and meta-analysis was to evaluate the effect of the veneering method on the bond strength of bilayer Y-TZP. MATERIAL AND METHODS: This review followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. Searches were performed on PubMed/MEDLINE, Web of Science (Core Collection), and Scopus for in vitro studies evaluating the effect of the veneering technique on the bond strength of bilayer Y-TZP. Statistical analyses were performed with random-effect models (α=.05). RESULTS: From 619 identified studies, 140 were selected for full-text analysis and 16 were included. Manual searching yielded no additional articles. The meta-analyses comprised 15 studies, and 1 study was included only in the descriptive analysis. Meta-analyses compared the hand-layered method (control) with pressed, fused, and cemented veneering methods. The fused and cemented techniques were analyzed by using subgroups assessing the veneering ceramic type (predominantly glass-ceramics and particle-filled glass-ceramics). Similar bond strength results (P=.540) were found for pressed and hand-layered veneered Y-TZP specimens. Fused veneers achieved higher bond strength values (P<.001) than the hand-layered veneers on Y-TZP frameworks, irrespective of the veneering ceramic type (predominantly glass-ceramics: P=.002; particle-filled glass-ceramics: P<.001). Global and subgroup analyses indicated that lower core-veneer bond strength values (P<.001) were found for cemented in relation to hand-layered veneers. CONCLUSIONS: Core-veneer interfacial adhesion was equivalent for pressed and hand-layered veneering techniques. Improved bond strength, regardless of the veneer ceramic material type, was achieved by the fused veneering method, which seems to be a promising choice for the veneering of Y-TZP. In contrast, the cemented method may be unsuitable for veneering Y-TZP structures because of its lower bond strength than the hand-layered veneering technique.

Effect of resin cement space on the fatigue behavior of bonded CAD/CAM leucite ceramic crowns.

This study evaluated the influence of occlusal resin cement space on the fatigue performance of bonded-leucite crowns to a dentin-analogue material. Leucite anatomical crowns were adhesively cemented to dentin-like preparations having distinct occlusal cement space (50, 100 and 300 µm) (n = 18), and subjected to step-stress fatigue testing (150 N - 350 N; step-size: 25 N; 20,000 cycles/step; 20 Hz). Fatigue data (load and number of cycles for failure) were analyzed using Kaplan-Meier and Mantel-Cox (log-rank) tests (p <0.05). Fractographic analysis and occlusal internal space measurements were also performed. There was no significant difference for the distinct occlusal cement layer (50 µm: 289 N, 136,111 cycles; 100 µm: 285 N, 132,778 cycles; 300 µm: 246 N, 101,667 cycles). Occlusal internal space analysis showed a mean thickness of 120.4 (50 µm), 174.9 (100 µm) and 337.2 (300 µm). All failures were radial cracks originating at the ceramic-cement interface. Distinct occlusal cement spaces had no effect on the fatigue behavior of anatomical leucite crowns.

Grinding of composite cores using diamond burs with different grit sizes: the effects on the retentive strength of zirconia crowns

Aim: To evaluate the retention of Y-TZP crowns cemented in aged composite cores ground with burs of different grit sizes. Methods: Sixty composite resin simplified full-crown preparations were scanned, while 60 Y-TZP crowns with occlusal retentions were milled. The composite preparations were stored for 120 days (wet environment-37°C) and randomly distributed into three groups (n=20) according to the type of composite core surface treatment. The groups were defined as: CTRL (control: No treatment), EFB (extra-fine diamond bur [25µm]), and CB (coarse diamond bur [107µm]). The grinding was performed with an adapted surveyor standardizing the speed and pressure of the grinding. The intaglio surfaces on the crowns were air-abraded with silica-coated alumina particles (30 µm) and then a silane was applied. The crowns were cemented with self-adhesive resin cement, thermocycled (12,000 cycles; 5/55°C), stored (120 days) and submitted to a retention test (0.5mm/min). The retentive strength data (MPa) were analyzed using one-way analysis of variance and Tukey test, as well as Weibull analysis. Failures were classified as 50C (above 50% of cement in the crown), 50S (above 50% of cement in the substrate) and COE (composite core cohesive failure). Results: No statistical difference was observed among the retention values (p=0.975). However, a higher Weibull modulus was observed in the CTRL group. The predominant type of failure was 50S (above 50% of cement in the substrate composite). Conclusion: The retention of zirconia crowns was not affected by grinding using diamond burs with different grit sizes (coarse/extra-fine) or when no grinding was performed

File-splitting multilayer vs monolithic Y-TZP: Fatigue flexural strength and loading stresses by finite element analysis.

OBJECTIVE: To compare file-splitting multilayer (fused and cemented) with monolithic Y-TZP on the fatigue flexural strength and finite element analysis (FEA) stresses. Additionally, to verify the effect of the material under tension in multilayer Y-TZP. METHODS: Disc-shaped (diameter: 14.4mm; thickness: 1.4mm) monolithic Y-TZP (IPS e.max ZirCAD - Ivoclar Vivadent) and trilayer specimens with Y-TZP framework (IPS e.max ZirCAD), intermediate layer of fusion ceramic (IPS e.max CAD Crystall./Connect) or resin cement (Multilink Automix) and lithium disilicate veneer (IPS e.max CAD) were divided into five groups (n=20): monolithic Y-TZP (M), fused file-splitting with framework under tension (F-FT), cemented file-splitting with framework under tension (C-FT), fused file-splitting with veneer under tension (F-VT) and cemented file-splitting with veneer under tension (C-VT). Fatigue flexural strength was determined (piston-on-three ball) by the staircase approach (750,000 cycles; 20Hz). Mean and confidence intervals (CI) were calculated. FEA was evaluated under the application of the experimental mean fatigue load. RESULTS: The fatigue strength was statistically different for all groups. Means and CI (MPa) were: M - 405.92 (CI 397.58-414.26), F-FT - 377.73 (CI 374.59-380.88), C-FT - 346.54 (CI 340.62-352.46), F-VT - 154.79 (CI 151.86-157.72) and C-VT - 100.34 (CI 97.42-103.26). FEA tensile stresses were similar to the mean experimental values (up to ≅10MPa of variation), with the most discrepant calculated stresses for C-FT (≅20MPa higher than experimental result). SIGNIFICANCE: Monolithic specimens showed the highest flexural fatigue strength and fused file-splitting resulted in higher fatigue strength than cemented file-splitting. Groups with the framework under tension exhibited higher flexural fatigue strength.

Y-TZP surface treatments and their effects on the bond strength to resin cement

Aim: This study evaluated the effect of surface treatments of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics on their bond strength to a resin cement. Methods: Seventy zirconia blocks (6 × 6 × 2 mm3, IPS e.max ZirCAD) were assigned into 7 groups (n=10) ­ as-sintered (AS), no treatment; tribochemical silica coating + silanization (TBS; Cojet-sand; ProSil); airabrasion with 45 µm alumina particles + universal primer (AAP; Monobond®Plus); fusion sputtering (FS); SiO2 nanofilm + silanization (SN; ProSil); FS+SN+ silanization (FSSN; ProSil); FS+SN+Universal Primer (FSSNP; Monobond®Plus). Afterwards, a resin cement (RelyX™ ARC) was applied inside cylinders (Ø = 0.96 mm × 1 mm height) placed on the zirconia surfaces. Microshear bond strength tests (µSBS) were carried out (1 mm/min). Failure and phase transformation analysis were performed. Bond strength data (MPa) were subjected to Kruskal-Wallis/Mann Whitney tests. Results: TBS (27 ± 1.2) and AAP (24.7 ± 0.8) showed higher bond strengths than the other groups, followed by FSSNP (15.5 ± 4.2) and FSSN (13.3 ± 3.6). FS (3.4 ± 0.44) and SN (9.5 ± 2.7) showed the lowest values (p < 0.001). Most of the specimens exhibited an adhesive failure. Conclusion: Air-abrasion by silica-coated alumina particles followed by silanization or by alumina particles followed by universal primer resulted in the highest resin bond strength to zirconia. Fusion sputtering and silica nanofilm deposition induced low strengths. However, when these methods are applied in combination and with a primer (FSSN and FSSNP), higher bond strengths may be achieved. Low bond strengths are obtained when no zirconia treatment is performed

Does veneering technique affect the flexural strength or load-to-failure of bilayer Y-TZP? A systematic review and meta-analysis.

STATEMENT OF PROBLEM: Causes of failures of bilayer yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) restorations include the processing technique and the properties of the veneer ceramic. The effect of the veneering method on the mechanical behavior of veneered Y-TZP remains unclear. PURPOSE: The purpose of this systematic review was to assess the effect of the veneering method on the flexural strength and failure load of bilayer Y-TZP. MATERIAL AND METHODS: This study followed the Preferred Reporting Items for the Systematic Reviews and Meta-Analyses (PRISMA) statement. Searches were performed through August 2017 in PubMed/MEDLINE, Web of Science (Core Collection), Scopus, and Embase, with no year or language limit, targeting in vitro studies evaluating the effect of the veneering technique on the flexural strength and load-to-failure of bilayer Y-TZP immediately or after aging. Statistical analyses were conducted using an appropriate software. Comparisons were drawn with random effect models (α=.05). RESULTS: From 3242 identified studies, 241 were selected for full-text analysis; from these, 33 studies were included. Manual searching yielded no additional papers. The meta-analysis consisted of 32 studies. Meta-analysis was performed separately for flexural strength and failure load data to compare the hand-layered method (control) with pressed, fused, and cemented veneering techniques. The cemented and fused methods were analyzed using subgroups depending on the veneering material being examined (predominantly glass-ceramics and particle-filled glass-ceramics), and the results were compared with those of the hand-layered method. The pressed group presented flexural strength (7 studies) (P=.150) and failure load (19 studies) (P=.140) values that were similar to those of the hand-layered group. Subgroup analysis revealed that the fused group with particle-filled glass-ceramics (7 studies) produced higher load-to-failure (P=.006) values than the hand-layered group. Subgroup analyses showed a statistical difference that favored the hand-layered over the cemented method, with predominantly glass-ceramic materials (5 studies) (P=.002). CONCLUSIONS: The fused technique with particle-filled glass-ceramics seems more appropriate for the veneering of Y-TZP, with improved failure load, than the hand-layered method with predominantly glass-ceramic materials. The use of predominantly glass-ceramics for the cemented method is not recommended as failure load was lower than for the hand-layered group. Pressed veneers showed failure load and flexural strength values similar to those of the the hand-layered technique.

Ceramic Surface Treatment with a Single-component Primer: Resin Adhesion to Glass Ceramics.

PURPOSE: To evaluate the microshear bond strength (µSBS) of composite cement bonded to two machined glass ceramics and its durability, comparing conventional surface conditioning (hydrofluoric acid + silane) to a one-step primer (Monobond Etch & Prime). MATERIALS AND METHODS: Machined slices of lithium disilicate ceramic (LDC) (IPS e.max CAD) and feldspathic ceramic (FC) (VITA Mark II) glass ceramics were divided into two groups (n = 10) according to two factors: 1. surface treatment: HF+S (ca 5% hydrofluoric acid [IPS Ceramic Etching GEL] + silane coupling agent [SIL; Monobond Plus]) or MEP (single-component ceramic conditioner; Monobond Etch & Prime); 2. storage condition: baseline (without aging; tested 24 h after cementing) or aged (70 days of water storage + 12,000 thermal cycles). Composite cement (Multilink Automix, Ivoclar Vivadent) was applied to starch matrices on the treated ceramic surfaces and photoactivated. A µSBS test was performed (0.5 mm/min) and the failure pattern was determined. Contact angle and micromorphological analyses were also performed. Data were analyzed with Student's t-test (α = 5%). RESULTS: For both ceramic materials, HF+S resulted in higher mean µSBS (MPa) at baseline (LDC: HF+S 21.2 ± 2.2 > MEP 10.4 ± 2.4; FC: HF+S 19.6 ± 4.3 > MEP 13.5 ± 5.4) and after aging (LDC: HF+S 14.64 ± 2.31 > MEP 9 ± 3.4; FC HF+S: 14.73 ± 3.33 > MEP 11.1 ± 3.3). HF+S resulted in a statistically significant decrease in mean µSBS after aging (p = 0.0001), while MEP yielded no significant reduction. The main failure type was adhesive between composite cement and ceramic. HF+S resuted in the lowest contact angle. CONCLUSIONS: Hydrofluoric acid + silane resulted in higher mean µSBS than Monobond Etch & Prime for both ceramics; however, Monobond Etch & Prime had stable bonding after aging.

Translucency of IPS e.max and cubic zirconia monolithic crowns.

STATEMENT OF PROBLEM: Although several monolithic zirconia ceramics have recently been introduced, the need for improved optical properties remains. The newest cubic-zirconia has been claimed to have optimal translucency characteristics for esthetic restorations. PURPOSE: This in vitro study evaluated the optical properties of novel cubic ultratranslucent (UT) and supertranslucent (ST) zirconia by comparing them with lithium disilicate (L-DIS) glass-ceramic for the manufacture of monolithic computer-aided design and computer-aided manufacturing (CAD-CAM) molar crowns. MATERIAL AND METHODS: The UT and ST multilayered zirconia and the low-translucency grade L-DIS were milled. Eighty monolithic crowns were made from 2 CAD files, corresponding to thicknesses of 1.0 and 1.5 mm, and subdivided (n=20) into 4 groups: UT1.0, UT1.5, ST1.0, and L-DIS1.5. All groups were shaded using A2 color standard. Translucency of the crowns was measured by total transmission, using a photoradiometer in a dark chamber; furthermore, the contrast ratio was analyzed using a dental spectrophotometer applied to the buccal surface of the crowns. Data were analyzed using the Kruskal-Wallis and post hoc multiple Mann-Whitney U tests with Bonferroni correction (α=.05 divided by the number of tests performed in each set). RESULTS: When the ceramic types were analyzed, using total transmission and contrast methods, they showed significantly different translucency levels: UT1.0>ST1.0>UT1.5>L-DIS1.5 (total transmission P<.001). Contrast ratio evaluation yielded similar results (P≤.006); however, the differences between ST1.0 and UT1.5 were not significant. CONCLUSIONS: Both the ST1.0 and UT1.0 crowns, even at the maximum thickness tested (UT1.5), showed significantly higher translucency than L-DIS. Zirconia translucency was improved by eliminating the tetragonal phase, which is responsible for the toughening effect; thus, further studies are advocated to investigate the mechanical resistance of cubic zirconia.

Influence of elastic modulus of intraradicular posts on the fracture load of roots restored with full crowns / Influência do modulo de elasticidade de retentores intrarradiculares na carga para fratura de raízes restauradas com coroas totais

Objective: This study aimed to evaluate the fracture load and displacement of roots restored with posts of different elastic modulus. Material and method: Thirty-six replicas of epoxy resin mixed with glass microfibers were made from an endodontically-treated human premolar root prepared to a length of 12 mm with a custom drill, leaving the apical 4 mm unprepared. Replicas were randomly restored with (n = 12): FP-LM (fiber post with low elastic modulus- 50 GPa), FP-HM (fiber post with high elastic modulus - 67 GPa) and MP (metallic post - 208 GPa), using self-curing adhesive and dual resin cement. Cores were built up with composite resin and metallic crowns were cemented in all the roots with self-adhesive resin cement with self-curing mode. Specimens were subjected to a fracture load test (45° inclination/0.5 mm/min) and displacement was registered at 100 N. Result: One-way ANOVA showed that elastic modulus of the post did not affect the fracture load means (p = 0.203) (FP-LM: 237.4 ± 65.11 N; FP-HM: 236.7 ± 92.85 N; MP: 295.8 ± 108.7 N) but was statistically significant for the displacement (p < 0.00): Tukey's test showed that FP-LM displacement mean (0.81 ± 0.15 mm) was significantly higher than those for FP-HM (0.46 ± 0.26 mm; p = 0.00) and MP (0.62 ± 0.07 mm; p = 0.04). Conclusion: Posts with different elastic modulus exhibit similar fracture loads, but a lower displacement is achieved when fiber posts with a high elastic modulus and metallic posts are used.

Objetivo: Este trabalho avaliou a carga para fratura e deslocamento de raízes restauradas com pinos de diferentes módulos de elasticidade. Material e método: Trinta e seis réplicas de microfibras de vidro embutidas em resina epóxi foram fabricadas a partir de uma raiz de um pré-molar tratado endodonticamente preparado em 12 mm de comprimento com brocas customizadas, deixando 4 mm apicais sem preparo. As raízes foram randomicamente restauradas com (n = 12): FP-LM (pino de fibra com um baixo módulo de elasticidade - 50 GPa), FP-HM (pino de fibra com um alto módulo de elasticidade - 67 GPa) e MP (pinos metálicos - 208 GPa), usando adesivo autopolimerizável e cimento resinoso dual. Núcleos foram confeccionados com resina composta e coroas metálicas foram cimentadas em todas as raízes com cimento resinoso autoadesivo com modo de polimerização químico. Os espécimes foram submetidos ao teste de fratura em 45° (inclinação de 45° / 0,5 mm/min) e o deslocamento foi registrado aos 100 N. Resultado: Anova 1 fator mostrou que o módulo de elasticidade dos retentores não afetou as médias de fratura (p = 0,203) (FP-LM: 237,4 ± 65,11 N; FP-HM: 236,7 ± 92,85 N; MP: 295,8 ± 108,7 N) mas foi estatisticamente significante para o deslocamento (p < 0,00): o teste de Tukey mostrou que a média de deslocamento do grupo FP-LM (0,81 ± 0,15 mm) foi significativamente maior do que o grupo FP-HM (0,46 ± 0,26 mm; p = 0,00) e MP (0,62 ± 0,07 mm; p = 0,47). Conclusão: Pinos com diferentes módulos de elasticidade mostram resistência similar, porém um menor deslocamento é obtido quando pinos de fibra com alto módulo de elasticidade (FP-HM/MP) são usados.

Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review.

The aim of this systematic review was to compare the clinical performance and failure modes of teeth restored with intra-radicular retainers. A search was performed on PubMed/Medline, Central and ClinicalTrials databases for randomized clinical trials comparing clinical behavior and failures of at least two types of retainers. From 341 detected papers, 16 were selected for full-text analysis, of which 9 met the eligibility criteria. A manual search added 2 more studies, totalizing 11 studies that were included in this review. Evaluated retainers were fiber (prefabricated and customized) and metal (prefabricated and cast) posts, and follow-up ranged from 6 months to 10 years. Most studies showed good clinical behavior for evaluated intra-radicular retainers. Reported survival rates varied from 71 to 100% for fiber posts and 50 to 97.1% for metal posts. Studies found no difference in the survival among different metal posts and most studies found no difference between fiber and metal posts. Two studies also showed that remaining dentine height, number of walls and ferrule increased the longevity of the restored teeth. Failures of fiber posts were mainly due to post loss of retention, while metal post failures were mostly related to root fracture, post fracture and crown and/or post loss of retention. In conclusion, metal and fiber posts present similar clinical behavior at short to medium term follow-up. Remaining dental structure and ferrule increase the survival of restored pulpless teeth. Studies with longer follow-up are needed.

Color stability of ceramic laminate veneers cemented with light-polymerizing and dual-polymerizing luting agent: A split-mouth randomized clinical trial.

STATEMENT OF PROBLEM: The color stability of luting agents influences the esthetics of ceramic laminate veneers. Clinical studies that have evaluated the color changes of veneers cemented to enamel with light- and dual-polymerizing resin cement are lacking. PURPOSE: The purpose of this split-mouth randomized clinical trial was to evaluate the color change and marginal discoloration of dual- and light-polymerizing cement used for cementation of ceramic laminate veneers. MATERIAL AND METHODS: In 10 participants, 0.3-mm-thick ceramic laminate veneers were cemented on the buccal surface of the second premolars without tooth preparation. A randomized application of light-polymerized cement was used on one side and a dual-polymerized cement on the contralateral side. The operator and participants were blinded to the activation mode. Color was evaluated by a blinded evaluator with a spectrophotometer at 24 hours and at 2, 6, 12, and 24 months after cementation. The CIELab (ΔE*ab) and CIEDE2000 (ΔE*00) formulas were used to quantify color alteration, and Δa*, Δb*, and ΔL* were calculated between the first and subsequent measurements. US Public Health Service guidelines were used to evaluate the marginal discoloration. RESULTS: Wilcoxon tests did not show a statistical difference in ΔE*ab and ΔE*00 between the groups (P>.05). At 24 months, the median ΔE*ab was 2.31 (interquartile ranges [IQR]: 3.34) for the light-polymerizing mode and 1.57 (IQR: 0.41) for the dual-polymerizing mode, while the median ΔE*00 was 1.65 for the light-polymerizing mode (IQR: 2.34) and 1.18 for the dual-polymerizing mode (IQR: 0.25). The thresholds for clinically acceptable color changes ΔE*ab>3.46 and ΔE*00>2.25 were found for both curing modes. Marginal discoloration was observed from the 2-year assessment. CONCLUSIONS: The color stability of ceramic laminate veneers was similar for both of the polymerizing modes for all evaluated periods. Marginal discoloration increased over a 2-year period for both the light- and the dual-polymerizing modes.

Clinical performance and failure modes of pulpless teeth restored with posts: a systematic review

Abstract The aim of this systematic review was to compare the clinical performance and failure modes of teeth restored with intra-radicular retainers. A search was performed on PubMed/Medline, Central and ClinicalTrials databases for randomized clinical trials comparing clinical behavior and failures of at least two types of retainers. From 341 detected papers, 16 were selected for full-text analysis, of which 9 met the eligibility criteria. A manual search added 2 more studies, totalizing 11 studies that were included in this review. Evaluated retainers were fiber (prefabricated and customized) and metal (prefabricated and cast) posts, and follow-up ranged from 6 months to 10 years. Most studies showed good clinical behavior for evaluated intra-radicular retainers. Reported survival rates varied from 71 to 100% for fiber posts and 50 to 97.1% for metal posts. Studies found no difference in the survival among different metal posts and most studies found no difference between fiber and metal posts. Two studies also showed that remaining dentine height, number of walls and ferrule increased the longevity of the restored teeth. Failures of fiber posts were mainly due to post loss of retention, while metal post failures were mostly related to root fracture, post fracture and crown and/or post loss of retention. In conclusion, metal and fiber posts present similar clinical behavior at short to medium term follow-up. Remaining dental structure and ferrule increase the survival of restored pulpless teeth. Studies with longer follow-up are needed.

Does air particle abrasion affect the flexural strength and phase transformation of Y-TZP? A systematic review and meta-analysis.

OBJECTIVES: A systematic review was conducted to assess the effects of air-particle abrasion procedures on the mechanical strength and phase transformation of yttria-stabilized tetragonal zirconia polycrystal (Y-TZP). DATA: This report followed the PRISMA Statement. From 1013 eligible studies, 78 were selected for full-text analysis, from which 37 were excluded. The 41 remaining papers were included for the systematic review; hand-searching yielded three papers. The review comprised a total of 44 studies; 21 were included in the meta-analysis. SOURCES: Searches were performed with no publication year limit through November 2015 in PubMed/MEDLINE, Web of Science (Core Collection) and Scopus databases. STUDY SELECTION: In vitro studies evaluating the effect of air-particle abrasion protocols on the mechanical strength and/or phase transformation of Y-TZP zirconia specimens, immediately or after aging. For the meta-analysis, flexural strength data of air-particle abrasion vs. control (nonabraded) were globally and subgroup analyzed. Subgroup analyses assessed blasting parameters (particle size, pressure, or time duration) and the effect of aging. Statistical analyses were conducted using RevMan 5.1 (Cochrane Collaboration, Copenhagen, Denmark). Comparisons were performed with random-effect models at a 5% significance level. Phase transformation data were included only in the systematic review, as insufficient data were available for meta-analysis. CONCLUSIONS: Airborne-particle abrasion improved flexural strength of Y-TZP, regardless of abrasion parameters and the presence or lack of aging (p≤0.05). Phase transformation tended to be increased by air abrasion immediately or with up to 2h of aging. However, after aging for 12h or more, the abraded Y-TZP showed less monoclinic content than the control.

Dietary and pharmacological compounds altering intestinal calcium absorption in humans and animals.

The intestine is the only gate for the entry of Ca to the body in humans and mammals. The entrance of Ca occurs via paracellular and intracellular pathways. All steps of the latter pathway are regulated by calcitriol and by other hormones. Dietary and pharmacological compounds also modulate the intestinal Ca absorption process. Among them, dietary Ca and P are known to alter the lipid and protein composition of the brush-border and basolateral membranes and, consequently, Ca transport. Ca intakes are below the requirements recommended by health professionals in most countries, triggering important health problems. Chronic low Ca intake has been related to illness conditions such as osteoporosis, hypertension, renal lithiasis and incidences of human cancer. Carbohydrates, mainly lactose, and prebiotics have been described as positive modulators of intestinal Ca absorption. Apparently, high meat proteins increase intestinal Ca absorption while the effect of dietary lipids remains unclear. Pharmacological compounds such as menadione, dl-butionine-S,R-sulfoximine and ursodeoxycholic acid also modify intestinal Ca absorption as a consequence of altering the redox state of the epithelial cells. The paracellular pathway of intestinal Ca absorption is poorly known and is under present study in some laboratories. Another field that needs to be explored more intensively is the influence of the gene × diet interaction on intestinal Ca absorption. Health professionals should be aware of this knowledge in order to develop nutritional or medical strategies to stimulate the efficiency of intestinal Ca absorption and to prevent diseases.

Fracture resistance of weakened roots restored with different intracanal retainers.

The purposes of the study were to evaluate the effect of mechanical cycling (MC) on the fracture resistance of endodontically treated weakened roots restored with different intraradicular retainers and to analyze the failure mode. Eighty bovine roots were prepared and restored: 20 roots were reconstructed with cast post-and-cores (CPCs); 20 with fiber posts (FPs); 20 with fiber posts with larger coronal diameter (FPLs); and 20 with anatomic posts (APs). Metal crowns were cemented in all the roots. Half of specimens from each restoration strategy (n = 10) were submitted to MC: CPC-MC, FP-MC, FPL-MC, and AP-MC. The specimens were subjected to a fracture resistance test. The results showed that the type of retainer used was statistically significant (P < 0.0004). The CPC specimens demonstrated a fracture resistance similar to that of the APs, but greater than that of the FPs and FPLs. MC was statistically significant (P < 0.003) and affected AP-MC fracture resistance, which was lower than that of CPC-MC and similar to those of FP-MC and FPL-MC.

Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts.

OBJECTIVE: Considering that periodontal ligament simulation may influence the stress distribution over teeth restored with intraradicular retainers, this study aimed to assess the combined effect of mechanical cycling and periodontal ligament simulation on both the bond strength between fiber posts and root dentin and the fracture resistance of teeth restored using glass fiber posts. MATERIAL AND METHODS: Ninety roots were randomly distributed into 3 groups (n=10) (C-MC: control; P-MC: polyether; AS-MC: addition silicone) to test bond strength and 6 groups (n=10) (C: control; P: polyether; AS: addition silicone, without mechanical cycling, and C-MC, P-MC and AS-MC with mechanical cycling) to test fracture strength, according to the material used to simulate the periodontal ligament. For the bond strength test, fiber posts were cemented, cores were built, mechanical cycling was applied (2×10(6) cycles, 88 N, 2.2 Hz, and 45º incline), and the teeth cut into 3 slices (2 mm), which were then subjected to the push-out test at 1 mm/min. For the fracture strength test, fiber posts were cemented, cores were built, and half of the groups received mechanical cycling, followed by the compressive strength (45° to the long axis and 1 mm/min) performed on all groups. RESULTS: Periodontal ligament simulation did not affect the bond strength (p=0.244) between post and dentin. Simulation of periodontal ligament (p=0.153) and application of mechanical cycling (p=0.97) did not affect fracture resistance. CONCLUSIONS: The materials used to simulate the periodontal ligament did not affect fracture or bond strength, therefore periodontal ligament simulation using the tested materials could be considered optional in the conditions of the study.

Influence of periodontal ligament simulation on bond strength and fracture resistance of roots restored with fiber posts

Objective: Considering that periodontal ligament simulation may influence the stress distribution over teeth restored with intraradicular retainers, this study aimed to assess the combined effect of mechanical cycling and periodontal ligament simulation on both the bond strength between fiber posts and root dentin and the fracture resistance of teeth restored using glass fiber posts. Material and Methods: Ninety roots were randomly distributed into 3 groups (n=10) (C-MC: control; P-MC: polyether; AS-MC: addition silicone) to test bond strength and 6 groups (n=10) (C: control; P: polyether; AS: addition silicone, without mechanical cycling, and C-MC, P-MC and AS-MC with mechanical cycling) to test fracture strength, according to the material used to simulate the periodontal ligament. For the bond strength test, fiber posts were cemented, cores were built, mechanical cycling was applied (2×106 cycles, 88 N, 2.2 Hz, and 45º incline), and the teeth cut into 3 slices (2 mm), which were then subjected to the push-out test at 1 mm/min. For the fracture strength test, fiber posts were cemented, cores were built, and half of the groups received mechanical cycling, followed by the compressive strength (45° to the long axis and 1 mm/min) performed on all groups. Results: Periodontal ligament simulation did not affect the bond strength (p=0.244) between post and dentin. Simulation of periodontal ligament (p=0.153) and application of mechanical cycling (p=0.97) did not affect fracture resistance. Conclusions: The materials used to simulate the periodontal ligament did not affect fracture or bond strength, therefore periodontal ligament simulation using the tested materials could be considered optional in the conditions of the study. .

Surgical treatment of transmigration of mandibular canine

Introduction: The occurrence of canine impaction is not a rare phenomenon, but transmigration of the tooth across the midline is a less common event. The finding is normally asymptomatic and the etiologic factors involved in the transmigration process are still unclear. Objective: To present a clinical case of surgical treatment of a transmigrated mandibular canine. Case report: A 17-year-old male patient presented to the dental clinic to remove an unerupted canine. Clinical and radiological examinations led to the diagnosis of a transmigrated canine in the mental region. Surgical removal was the treatment of choice and further radiographs were needed to complement the clinical exam and to determine the location of the tooth precisely for the surgical procedure. Postoperative period was uneventful. Canine transmigration is a rare finding and symptoms are usually absent. Conclusion: An early detection is important to plan the treatment and mainly to avoid future complications.

Associação entre a duração do aleitamento materno e sua influência sobre o desenvolvimento de hábitos orais deletérios / Association between duration of breast feeding and its influence upon the development of harmful oral habits

Introdução e objetivo: O objetivo deste estudo foi identificar a presença de hábitos bucais deletérios e relacioná-la com a duração de aleitamento materno. Material e métodos: Foi realizado um estudo retrospectivo,utilizando-se dados secundários contidos em 143 prontuáriosde crianças entre 0 e 59 meses, assistidas em clínica pública de Odontopediatria. Nos prontuários, constavam perguntas sobre a presença de hábitos bucais e sua frequência, bem como o período de duração do aleitamento materno. Os dados foram analisados pelo emprego do teste do qui-quadrado, com nível de significância de5%. Resultados: Verificou-se a presença de sucção de chupeta em 94crianças (76,4%), respiração bucal em 28 (22,7%), bruxismo em 18(14,7%) e sucção digital em 15 (12,2%). Dos 143 prontuários analisados,em 94 (65,7%) a duração relatada do aleitamento materno foi inferior a seis meses. Houve associação estatisticamente significante entre tempo de aleitamento materno e presença de hábito bucal deletério.Conclusão: O tempo insuficiente de aleitamento no peito está associado à presença de hábitos bucais deletérios.

Introduction and objective: This study aimed to identify harmful oral habits and relate them to the duration of breast feeding. Material and methods: This was a retrospective study, using data from 143 dentalcharts of 0-59 months-old children of a public pediatric dental clinic.The charts contained information about presence of harmful oral habits and its frequency, as well as the duration of breast feeding. Data were analyzed through chi-square test with significance level of 5%. Results:It was observed that 94 children (76.4%) used pacifiers, 28 (22.7%)presented oral breathing, 18 (14.7%) had bruxism and 15 (12.2%) bittheir nails. Data from 143 dental charts indicated that 94 children(65.7%) were breastfed for less than 6 months. There was a statistical significant association between duration of breast feeding and harmful oral habits. Conclusion: The insufficient duration of breast feeding is associated with the presence of harmful oral habits.